TA72PXXXWB/K Series SPECIFICATIONS.
Photovoltaic cell: Polycrystalline silicon
Rated maximum power: 315W, 320W (0~+3%)
Module conversion efficiency (total area): 16.23%, 16.49%
Cable Lenght: 1200 mm
Operating temperature: -40°C ~ +85°C
Maximum system voltage: 1000V
Dimension (LxWxH): 1956x992x45 mm
Weight: 26 kg
Maximum static load: 5400Pa(Front) , 2400Pa(Back)
Junction Box: IP67 with bypass diode
Compliance standard: IEC1215, IEC61730
THAI TABUCHI ELECTRIC : Three-phase 25kW Solar Inverter
Distributed type inverter which is Ideal for commercial solar PV system
Using 6MPPT method to minimizing the generation loss to be used
In the long term.
CPA-06
Eliminate the scattering of Resist Chip
– No blowing by air so that tidiness is raised
– Possible to handle baseboard as thin as 40µm
HLM-AV610
– Package: Excellent conformity
– Gold plating: Increse adhesion
– Vacuum laminator is about 2 times better than regular laminator
HGL-600
No Vacuum Lamination
– No friction between PET the machine
Tidiness UP
– Eliminate the genaration of chip by half-cutting
– Reduce the source of foreign substances by removing the operator
– Restrain the scattering of foreign substances by removing the air blow
LZIB
– Able to reduce more than 70% of power consumption, Compared to mercury lamp
– Weighs Only 13.5kg (LZIB130841) .44% of weight reduction, compared to mercury lamp (HZAB40941:24kg)
– The compact design does not disturb full use space
– Able to switching on/off instantly. Save furture power by using only when it is necessary
FPC
– For Flexible Printed Circuits
HLM-A60 Series
Features
– No tucking lamination System
– Foreign substance reduction
– Long life cutter
LZTB
– High transparency is achieved with a unique optical design. Allows easier viewing of in-tank conditional incandescent lamps
– Without ultraviolet and infrared rays, free from the chemical reaction of in-tank solvents and other harmful effect in stored materials
– Fllament-less structure provides strong vibraton resistance, eliminating bothers of exchanging lamps
LZAB
– The fittings can be installed in the locations of existing lighting fixtures, so they are the most appropriate for changing fluorescent fixtures to LED fixtures
– Improvements from previous Seiwa models (LZAA Series) : 20% better intrinsic energy consumption efficiency
– Both single-lamp and Double-lamp fluorescent light equivalence are available to match the brightness need. Wide selection of mounting types